MSI Gaming GF63 Thin 11UC-1276US RAM upgrade specifications
MSI GF63 Thin 11UC-1276US gaming laptop supports DDR4-SDRAM memory upgrades across two SO-DIMM slots. Maximum RAM capacity reaches 64 GB total, with compatible modules operating at 3200 MHz frequency. Current memory specifications allow for expansion using SO-DIMM form factor DDR4 modules. Upgrade options accommodate increased multitasking and performance requirements for gaming applications on the GF series platform.
Memory Upgrade Specifications
| Specification | Value |
|---|---|
| Memory slots | 2x SO-DIMM |
| Form factor | SO-DIMM |
| Memory type | DDR4-SDRAM |
| Frequency | 3200 MHz |
| Maximum RAM | 64 GB |
| Voltage | 1.2V |
| Number of pins | 260-pin |
| Interface | PC4 |
| PC Speed Rating | PC4-3200 (PC4-25600) |
| Bandwidth | 25.6 GB/s |
| Laptop Release date | 21 July 2023 |
Additional Notes
- Dual channel mode requires identical module pairs to optimize memory bandwidth and reduce latency during heavy gaming workloads.
- The 2 slot configuration necessitates the replacement of existing modules for capacity increases because no additional expansion headers exist.
- Utilizing 3200 MHz modules with higher latency values than the factory components will result in the system defaulting to the slowest shared timing profile.
- Installing memory modules with capacities exceeding 32 GB per slot will prevent the system from posting due to the hardware addressing limit of the MSI GF63 Thin 11UC-1276US firmware.
- Successful installation requires 260 pin physical architecture to ensure compatibility with the motherboard interface.
- Performance gains in integrated graphics tasks rely heavily on populating both slots to enable 128 bit bus widths.
- Voltage requirements for new modules must match the 1.2V standard to avoid thermal instability or power delivery failures.