MSI Gaming GF65 9SEXR-801XIT Thin RAM upgrade specifications
MSI GF65 9SEXR-801XIT Thin gaming laptop supports DDR4-SDRAM memory upgrades. The system features 2x SO-DIMM slots with maximum RAM capacity of 64 GB. Compatible memory modules operate at 2666 MHz frequency using SO-DIMM form factor. Upgrade specifications allow installation of DDR4 memory modules in both available slots to enhance system performance and multitasking capabilities.
Memory Upgrade Specifications
| Specification | Value |
|---|---|
| Memory slots | 2x SO-DIMM |
| Form factor | SO-DIMM |
| Memory type | DDR4-SDRAM |
| Frequency | 2666 MHz |
| Maximum RAM | 64 GB |
| Voltage | 1.2V |
| Number of pins | 260-pin |
| Interface | PC4 |
| PC Speed Rating | PC4-2666 (PC4-21328) |
| Bandwidth | 21.3 GB/s |
| Laptop Release date | 23 June 2020 |
Additional Notes
- Full utilization of the 64 GB capacity requires the physical removal of existing pre installed modules due to the dual slot architecture limitation.
- The MSI GF65 9SEXR-801XIT Thin utilizes a dual channel configuration that mandates paired module installation to maximize memory bus bandwidth.
- Installing memory modules with frequencies exceeding 2666 MHz results in automatic downclocking to match the native motherboard chipset limitations.
- System stability depends on the use of unbuffered non ECC hardware because the consumer grade mobile chipset lacks parity bit error correction support.
- Accessing the SO-DIMM slots involves the removal of the entire bottom chassis panel which may impact certain regional warranty seals depending on local service policies.
- High density 32 GB modules must adhere to the standard 1.2V JEDEC profile to ensure compatibility with the factory BIOS power delivery settings.
- Physical clearance within the compact chassis restricts memory upgrades to standard height SO-DIMM modules without integrated bulky heat spreaders.