MSI Gaming GF75 10SDR-206 Thin RAM upgrade specifications
The MSI GF75 10SDR-206 Thin Gaming series laptop supports DDR4-SDRAM memory upgrades through two SO-DIMM slots. The upgrade specifications indicate maximum RAM capacity of 64 GB, with compatible memory operating at 2666 MHz frequency. The SO-DIMM form factor defines the physical specifications for memory module installation. Existing memory configurations can be expanded by replacing or adding compatible DDR4 modules to the available slots, allowing users to upgrade the laptop's total memory capacity up to the maximum 64 GB specification limit.
Memory Upgrade Specifications
| Specification | Value |
|---|---|
| Memory slots | 2x SO-DIMM |
| Form factor | SO-DIMM |
| Memory type | DDR4-SDRAM |
| Frequency | 2666 MHz |
| Maximum RAM | 64 GB |
| Voltage | 1.2V |
| Number of pins | 260-pin |
| Interface | PC4 |
| PC Speed Rating | PC4-2666 (PC4-21328) |
| Bandwidth | 21.3 GB/s |
| Laptop Release date | 11 May 2020 |
Additional Notes
- Dual channel mode functionality requires installing matching modules in both physical slots to maximize memory bandwidth for the MSI GF75 10SDR-206 Thin.
- Operating speeds will be capped at the lowest common frequency if a 2666 MHz module is paired with a higher rated alternative.
- Maximum capacity expansion to 64 GB necessitates the removal of all factory installed modules because no additional unoccupied slots exist.
- The SO-DIMM form factor limits hardware compatibility to laptop specific hardware and excludes standard desktop DIMM components.
- Synchronous DRAM technology dictates that latency timings must align between modules to prevent system instability or boot failures.
- Physical access to the memory slots requires the removal of the entire bottom chassis panel which may involve breaking factory seals.
- The integrated memory controller on the processor determines the actual realized data transfer rates regardless of the maximum theoretical speed of the RAM sticks.