MSI Gaming GF76 12UC-037ES Katana RAM upgrade specifications
MSI GF76 12UC-037ES Katana gaming laptop supports DDR4-SDRAM memory upgrades through two SO-DIMM slots. Maximum compatible RAM capacity reaches 64 GB total. Memory specifications include DDR4 modules operating at 3200 MHz frequency. Existing memory configuration can be expanded by replacing or adding compatible SO-DIMM modules to upgrade laptop performance. Users seeking memory expansion should verify module compatibility with MSI GF76 12UC-037ES Katana specifications before installation.
Memory Upgrade Specifications
| Specification | Value |
|---|---|
| Memory slots | 2x SO-DIMM |
| Form factor | SO-DIMM |
| Memory type | DDR4-SDRAM |
| Frequency | 3200 MHz |
| Maximum RAM | 64 GB |
| Voltage | 1.2V |
| Number of pins | 260-pin |
| Interface | PC4 |
| PC Speed Rating | PC4-3200 (PC4-25600) |
| Bandwidth | 25.6 GB/s |
| Laptop Release date | 07 January 2022 |
Additional Notes
- Dual channel mode is only achievable when both slots contain matching modules to facilitate optimized memory bandwidth for the processor.
- The MSI GF76 12UC-037ES Katana requires unbuffered non-ECC modules because the platform lacks support for error-correcting code memory.
- Maximum capacity expansion to 64 GB necessitates the removal of all factory installed hardware since there are no additional vacant slots available.
- Latency timings on replacement modules should align with JEDEC standards to ensure system stability during heavy gaming loads without manual BIOS voltage adjustments.
- Utilizing memory modules with speeds higher than 3200 MHz will result in a downclocking bottleneck to match the hardware controller limitations.
- Physical access to the SO-DIMM slots involves the removal of the entire lower chassis panel which may impact certain regional warranty seals.
- The DDR4 architecture prevents the installation of newer DDR5 hardware due to different pin configurations and voltage requirements.