MSI Gaming Katana GF76 12UGS-087 RAM upgrade specifications

MSI Katana GF76 12UGS-087 MSI Katana GF76 12UGS-087 MSI Katana GF76 12UGS-087 MSI Katana GF76 12UGS-087

The MSI Katana GF76 12UGS-087 gaming laptop features two SO-DIMM slots for DDR4-SDRAM memory upgrades. The system supports a maximum RAM capacity of 64 GB total, with compatible modules operating at 3200 MHz frequency. Users can upgrade the memory by installing DDR4 SO-DIMM modules into the available slots. The specifications indicate this gaming series model accommodates standard laptop memory form factors for enhanced performance and multitasking capabilities.

Memory Upgrade Specifications

SpecificationValue
Memory slots2x SO-DIMM
Form factorSO-DIMM
Memory typeDDR4-SDRAM
Frequency3200 MHz
Maximum RAM64 GB
Voltage1.2V
Number of pins260-pin
InterfacePC4
PC Speed RatingPC4-3200 (PC4-25600)
Bandwidth25.6 GB/s
Laptop Release date31 January 2022

Additional Notes

  • The dual channel architecture requires two identical modules to achieve peak memory bandwidth and reduce CPU bottlenecks during high frame rate gaming.
  • The MSI Katana GF76 12UGS-087 utilizes a standard DDR4 interface which precludes the use of newer DDR5 modules due to physical pin configuration and voltage differences.
  • Upgrading to 64 GB necessitates the removal of all factory installed memory because the system relies on only 2 SO-DIMM slots for its total capacity.
  • Internal component access for memory installation requires the removal of the entire bottom chassis panel which may involve piercing a factory seal sticker in certain regions.
  • The 3200 MHz frequency reflects the maximum supported JEDEC speed for the chipset meaning higher rated modules will downclock to this baseline automatically.
  • Physical clearance within the slim chassis limits memory upgrades to standard height SO-DIMM modules without integrated bulky heat spreaders.
  • Achieving the maximum capacity involves a synchronized latency match between slots to prevent system instability or boot failures.