MSI Gaming GL75 10SFK-478FR Leopard RAM upgrade specifications
MSI GL75 10SFK-478FR Leopard gaming laptop supports DDR4-SDRAM memory upgrades with 2x SO-DIMM slots. Maximum RAM capacity reaches 64 GB total. Compatible memory modules feature SO-DIMM form factor and operate at 3200 MHz frequency. Specifications allow for memory expansion to enhance system performance and multitasking capabilities on this gaming series model.
Memory Upgrade Specifications
| Specification | Value |
|---|---|
| Memory slots | 2x SO-DIMM |
| Form factor | SO-DIMM |
| Memory type | DDR4-SDRAM |
| Frequency | 3200 MHz |
| Maximum RAM | 64 GB |
| Voltage | 1.2V |
| Number of pins | 260-pin |
| Interface | PC4 |
| PC Speed Rating | PC4-3200 (PC4-25600) |
| Bandwidth | 25.6 GB/s |
| Laptop Release date | 06 January 2021 |
Additional Notes
- The dual slot configuration requires removing the factory modules to reach the maximum 64 GB capacity because no soldered memory is present for expansion.
- Operating the MSI GL75 10SFK-478FR Leopard with a single module will trigger single channel mode which creates a significant memory bandwidth bottleneck for the central processing unit.
- Latency parity between installed modules is necessary to prevent the system from defaulting to the highest common denominator timings which reduces overall data throughput.
- High capacity 32 GB modules generate more heat than lower capacity sticks and rely on the internal chassis airflow for thermal management during sustained heavy workloads.
- The absence of additional slots means that any future memory increases will result in the total displacement of existing hardware and redundant electronic waste.
- Physical installation involves navigating a plastic clip retention system that requires a non conductive pry tool to avoid shorting internal motherboard components.
- Memory modules exceeding the 3200 MHz frequency will be downclocked by the integrated memory controller to match the maximum supported architectural speed.