MSI Gaming GL75 9SE-076CA RAM upgrade specifications
MSI GL75 9SE-076CA Gaming series laptop features DDR4-SDRAM memory upgrade specifications with two SO-DIMM slots supporting maximum RAM capacity of 64 GB. Compatible memory modules operate at 2666 MHz frequency. The upgrade configuration allows replacement or expansion of existing memory in the GL75 9SE-076CA model through accessible SO-DIMM slots, enabling users to enhance system performance up to specifications.
Memory Upgrade Specifications
| Specification | Value |
|---|---|
| Memory slots | 2x SO-DIMM |
| Form factor | SO-DIMM |
| Memory type | DDR4-SDRAM |
| Frequency | 2666 MHz |
| Maximum RAM | 64 GB |
| Voltage | 1.2V |
| Number of pins | 260-pin |
| Interface | PC4 |
| PC Speed Rating | PC4-2666 (PC4-21328) |
| Bandwidth | 21.3 GB/s |
| Laptop Release date | 06 November 2019 |
Additional Notes
- The dual channel architecture requires identical module pairs to achieve peak memory bandwidth and prevent synchronous timing mismatches.
- Installing modules with higher frequency ratings results in downclocking to the system bus limit of 2666 MHz due to chipset controller restrictions.
- Reaching the maximum 64 GB capacity on the MSI GL75 9SE-076CA necessitates the removal of all factory installed hardware because no vacant expansion slots exist.
- Integrated memory controllers in this generation prefer CL19 latency timings to maintain stability under sustained thermal loads.
- Physical access to the SO-DIMM sockets requires complete removal of the lower chassis panel which involves breaking the factory seal and potential warranty implications in specific regions.
- The use of high density 32 GB sticks is mandatory for reaching the upper memory ceiling since the motherboard layout is restricted to two physical interfaces.
- Upgrading beyond the base configuration reduces reliance on the Windows page file which extends the operational lifespan of the primary solid state drive.