MSI Gaming GL76 12UEK-097XES Pulse RAM upgrade specifications
The MSI GL76 12UEK-097XES Pulse gaming laptop features two SO-DIMM memory slots supporting DDR4-SDRAM upgrades. The device accommodates a maximum RAM capacity of 64 GB, with compatible modules operating at 3200 MHz frequency. Memory upgrade specifications allow users to replace or expand the existing DDR4 modules within the two available slots to reach the maximum supported capacity. The GL series Pulse model supports DDR4-SDRAM memory technology for performance enhancement and multitasking capabilities.
Memory Upgrade Specifications
| Specification | Value |
|---|---|
| Memory slots | 2x SO-DIMM |
| Form factor | SO-DIMM |
| Memory type | DDR4-SDRAM |
| Frequency | 3200 MHz |
| Maximum RAM | 64 GB |
| Voltage | 1.2V |
| Number of pins | 260-pin |
| Interface | PC4 |
| PC Speed Rating | PC4-3200 (PC4-25600) |
| Bandwidth | 25.6 GB/s |
| Laptop Release date | 23 February 2022 |
Additional Notes
- Dual channel memory architecture requires installing two modules of identical capacity and frequency to maximize memory bandwidth for high frame rate gaming on the MSI GL76 12UEK-097XES Pulse.
- Upgrading beyond the factory configuration requires total replacement of existing modules because the system utilizes both available SO-DIMM slots for standard operation.
- Mixing modules with different CAS latencies will force the system to default to the slower timing of the two units, potentially increasing system latency.
- The 64 GB threshold represents the maximum addressable limit of the integrated memory controller, making higher capacity modules incompatible even if they physically fit the slots.
- Accessing the memory slots involves removing the entire bottom chassis panel which may involve breaking a factory seal depending on regional service center policies.
- Synchronous operation at 3200 MHz is contingent on the processor supporting this specific JEDEC profile without requiring XMP manual BIOS adjustments.
- Voltage requirements for DDR4 SO-DIMM modules must match 1.2V to ensure thermal stability and prevent motherboard power delivery failure.