MSI Gaming GP76 Leopard 10UG-090FR RAM upgrade specifications

MSI GP76 Leopard 10UG-090FR MSI GP76 Leopard 10UG-090FR MSI GP76 Leopard 10UG-090FR MSI GP76 Leopard 10UG-090FR MSI GP76 Leopard 10UG-090FR

The MSI GP76 Leopard 10UG-090FR gaming laptop features DDR4-SDRAM memory upgrade specifications. The device contains two SO-DIMM slots for memory expansion, supporting a maximum RAM capacity of 64 GB. Compatible memory modules operate at 3200 MHz frequency. Upgrade options allow users to expand the existing memory configuration using DDR4 SO-DIMM form factor modules. The specifications indicate support for dual-channel memory architecture with maximum 32 GB capacity per slot. Performance-oriented gaming systems benefit from this upgrade potential for multitasking and demanding applications.

Memory Upgrade Specifications

SpecificationValue
Memory slots2x SO-DIMM
Form factorSO-DIMM
Memory typeDDR4-SDRAM
Frequency3200 MHz
Maximum RAM64 GB
Voltage1.2V
Number of pins260-pin
InterfacePC4
PC Speed RatingPC4-3200 (PC4-25600)
Bandwidth25.6 GB/s
Laptop Release date01 January 2021

Additional Notes

  • The dual-slot configuration enables dual-channel memory architecture which is essential for maximizing the bandwidth required by the high-performance processor and GPU found in the MSI GP76 Leopard 10UG-090FR.
  • Utilizing memory modules with speeds exceeding 3200 MHz will result in automatic downclocking because the 10th Generation Intel chipset limits the maximum operational frequency.
  • The 64 GB capacity limit necessitates the use of high-density 32 GB modules in both slots to reach the ceiling for memory-intensive workflows like 4K video editing or complex 3D rendering.
  • Populating only a single slot forces the system into single-channel mode which significantly increases memory latency and reduces frame rates in specialized gaming applications.
  • Installation of non-ECC unbuffered memory is required as the motherboard firmware does not support error-correcting code modules typically used in workstations.
  • Accessing the SO-DIMM slots requires the removal of the entire bottom chassis plate which may involve breaking a Factory Seal sticker depending on regional warranty policies.
  • Optimal performance stability is achieved by installing a matched pair of modules to ensure identical CAS latency and timing parameters across both memory channels.