MSI Gaming GS75 8SF-011AU Stealth RAM upgrade specifications

MSI GS75 8SF-011AU Stealth MSI GS75 8SF-011AU Stealth MSI GS75 8SF-011AU Stealth MSI GS75 8SF-011AU Stealth MSI GS75 8SF-011AU Stealth

The MSI GS75 8SF-011AU Stealth gaming laptop features DDR4-SDRAM memory upgrade specifications with 2x SO-DIMM slots supporting maximum capacity of 32 GB. Compatible memory operates at 2666 MHz frequency. The upgrade supports standard SO-DIMM form factor modules, enabling memory expansion for enhanced multitasking performance on the GS series gaming platform.

Memory Upgrade Specifications

SpecificationValue
Memory slots2x SO-DIMM
Form factorSO-DIMM
Memory typeDDR4-SDRAM
Frequency2666 MHz
Maximum RAM32 GB
Voltage1.2V
Number of pins260-pin
InterfacePC4
PC Speed RatingPC4-2666 (PC4-21328)
Bandwidth21.3 GB/s
Laptop Release date02 February 2019

Additional Notes

  • The MSI GS75 8SF-011AU Stealth utilizes a flipped motherboard design which requires total disassembly of the chassis and removal of the mainboard to access the inward-facing memory slots for hardware changes.
  • Dual-channel memory architecture requires matching module densities in both slots to ensure peak memory bandwidth and prevent synchronous timing downgrades.
  • Installing modules with lower latency timings than the factory-shipped hardware will not result in performance gains as the system BIOS lacks native support for XMP profiles or manual voltage adjustments.
  • Internal heat management relies on thin-profile cooling solutions which may be impacted by the addition of memory modules featuring thick integrated heatsinks due to tightly packed internal tolerances.
  • The processor architecture limits the memory controller to a ceiling of 2666 MHz regardless of the installation of higher-rated overclocking modules which will automatically downclock to match the system bus speed.
  • Maximum capacity expansion involves the replacement of both existing modules since the absence of additional vacant slots prevents incremental memory additions.
  • Breaking the factory seal sticker located over a chassis screw is necessary to perform a memory swap which may impact warranty coverage depending on local regional consumer laws.