MSI Gaming GS77 12UGS-056PL Stealth RAM upgrade specifications

MSI GS77 12UGS-056PL Stealth MSI GS77 12UGS-056PL Stealth MSI GS77 12UGS-056PL Stealth MSI GS77 12UGS-056PL Stealth MSI GS77 12UGS-056PL Stealth

MSI GS77 12UGS-056PL Stealth gaming laptop supports DDR5-SDRAM memory upgrades. The device features 2x SO-DIMM slots for maximum RAM capacity of 64 GB. Compatible memory modules operate at 4800 MHz frequency. Specifications indicate SO-DIMM form factor components required for upgrade compatibility. The GS series gaming model accommodates memory configurations supporting enhanced multitasking and performance capabilities through dual-slot architecture.

Memory Upgrade Specifications

SpecificationValue
Memory slots2x SO-DIMM
Form factorSO-DIMM
Memory typeDDR5-SDRAM
Frequency4800 MHz
Maximum RAM64 GB
Voltage1.1V
Number of pins262-pin
InterfacePC5
PC Speed RatingPC5-4800 (PC5-38400)
Bandwidth38.4 GB/s
Laptop Release date10 May 2022

Additional Notes

  • Dual channel architecture requires matching memory modules in both slots to provide maximum theoretical bandwidth for the processor.
  • The MSI GS77 12UGS-056PL Stealth motherboard architecture dictates that any speed exceeding 4800 MHz will automatically downclock to match the system firmware limit.
  • Replacing factory modules requires a total swap because the absence of soldered memory means the system lacks a base RAM buffer if slots are empty.
  • High density 32 GB modules are necessary to reach the 64 GB threshold due to the physical limitation of having only 2 expansion points.
  • DDR5 SODIMM modules operate at lower voltages than previous generations which reduces thermal pressure during high intensity tasks despite the compact chassis design.
  • Latency timings must be compatible between both sticks to avoid system instability or boot failures during POST cycles.
  • Upgrading to the 64 GB limit improves 1 percent low frame rates in memory intensive simulation titles more than it increases peak frames per second.
  • Physical access to the SODIMM slots usually requires the removal of the bottom panel which may involve piercing a factory seal sticker in certain regions.