MSI Gaming GT76 9SFS-273IT Titan DT RAM upgrade specifications

MSI GT76 9SFS-273IT Titan DT MSI GT76 9SFS-273IT Titan DT MSI GT76 9SFS-273IT Titan DT MSI GT76 9SFS-273IT Titan DT MSI GT76 9SFS-273IT Titan DT

The MSI GT76 9SFS-273IT Titan DT Gaming series laptop supports DDR4-SDRAM memory upgrades through four SO-DIMM slots. Maximum compatible RAM capacity reaches 128 GB total. Memory specifications include DDR4 frequency of 2666 MHz. The upgrade configuration accommodates individual SO-DIMM modules for memory expansion within the established slot architecture and capacity limitations of the GT76 9SFS-273IT Titan DT model.

Memory Upgrade Specifications

SpecificationValue
Memory slots4x SO-DIMM
Form factorSO-DIMM
Memory typeDDR4-SDRAM
Frequency2666 MHz
Maximum RAM128 GB
Voltage1.2V
Number of pins260-pin
InterfacePC4
PC Speed RatingPC4-2666 (PC4-21328)
Bandwidth21.3 GB/s
Laptop Release date16 April 2020

Additional Notes

  • The quadruple slot configuration requires matching modules in pairs to activate dual channel bandwidth across all banks for optimal memory controller efficiency.
  • Physical access to all memory banks in the MSI GT76 9SFS-273IT Titan DT necessitates the removal of the primary cooling assembly and keyboard due to the tiered motherboard layout.
  • Populating all 4 slots with high density 32 GB modules increases the thermal load on the internal voltage regulator modules during sustained memory intensive tasks.
  • The memory architecture supports non ECC unbuffered modules only and will automatically downclock any higher frequency RAM to the 2666 MHz processor limit.
  • Total system latency remains dependent on the slowest module installed since the BIOS synchronizes all 4 slots to the highest common timing profile.
  • Upgrading beyond the factory pre installed capacity requires identical CAS latency ratings across all populated slots to prevent boot failure or system instability.
  • The 128 GB threshold is achieved by using 16Gb die density modules which may require a BIOS update if the firmware version predates the release of high capacity SO DIMM hardware.