MSI Workstation WE63 8SJ-629 RAM upgrade specifications

MSI WE63 8SJ-629 MSI WE63 8SJ-629 MSI WE63 8SJ-629 MSI WE63 8SJ-629 MSI WE63 8SJ-629

The MSI WE63 8SJ-629 workstation features two SO-DIMM slots supporting DDR4-SDRAM memory upgrades. The laptop accommodates a maximum RAM capacity of 64 GB, with compatible memory operating at 2666 MHz frequency. Specifications indicate the WE63 series supports SO-DIMM form factor modules for memory expansion and upgrades on this professional workstation model.

Memory Upgrade Specifications

SpecificationValue
Memory slots2x SO-DIMM
Form factorSO-DIMM
Memory typeDDR4-SDRAM
Frequency2666 MHz
Maximum RAM64 GB
Voltage1.2V
Number of pins260-pin
InterfacePC4
PC Speed RatingPC4-2666 (PC4-21328)
Bandwidth21.3 GB/s
Laptop Release date16 September 2018

Additional Notes

  • The 2666 MHz specification indicates DDR4-2666, which operates at PC4-21300 bandwidth delivering 21.3 GB/s theoretical maximum throughput per channel.
  • Dual-channel configuration requires matched pairs in both slots to achieve combined 42.6 GB/s memory bandwidth.
  • SO-DIMM slots restrict upgrades to laptop-specific modules, which typically cost 15-30% more than desktop DIMM equivalents at identical specifications.
  • The 64 GB ceiling requires 2x32 GB modules, limiting future expansion since both slots must be populated to reach maximum capacity.
  • CL19 represents the typical CAS latency for DDR4-2666, translating to approximately 14.25 nanoseconds absolute latency before data access.
  • Mixing modules with different densities or timings may force the system to downclock to the slowest module's specifications or disable dual-channel mode.
  • JEDEC standard voltage for DDR4-2666 is 1.2V, though some modules may require 1.35V XMP profiles that workstation BIOS implementations may not support.
  • Physical clearance beneath the keyboard assembly typically limits SO-DIMM module height to standard 30mm, preventing installation of certain high-density or RGB variants.
  • Memory controller on 8th-generation Intel mobile processors officially supports up to DDR4-2666, meaning faster modules will downclock without performance benefit.
  • Non-ECC unbuffered modules are required for this consumer workstation platform, as registered or ECC variants will cause POST failure or remain unrecognized.
  • Single-rank versus dual-rank architecture affects memory interleaving performance, with dual-rank 32 GB modules potentially offering 5-10% higher bandwidth in certain workloads.
  • Accessing memory slots in this workstation series requires bottom panel removal, voiding certain regional warranty seals depending on service policies.