MSI Workstation WE65 9TJ-015CA RAM upgrade specifications
The MSI WE65 9TJ-015CA Workstation series laptop features DDR4-SDRAM memory upgrade specifications with two SO-DIMM slots supporting maximum RAM capacity of 64 GB. Compatible memory operates at 2666 MHz frequency. The SO-DIMM form factor enables upgrade compatibility for enhanced system performance. Specifications indicate dual-slot configuration allowing modular memory expansion within the WE65 series workstation platform.
Memory Upgrade Specifications
| Specification | Value |
|---|---|
| Memory slots | 2x SO-DIMM |
| Form factor | SO-DIMM |
| Memory type | DDR4-SDRAM |
| Frequency | 2666 MHz |
| Maximum RAM | 64 GB |
| Voltage | 1.2V |
| Number of pins | 260-pin |
| Interface | PC4 |
| PC Speed Rating | PC4-2666 (PC4-21328) |
| Bandwidth | 21.3 GB/s |
| Laptop Release date | 25 November 2019 |
Additional Notes
- Dual channel architectural support requires installing matched modules in pairs to maximize the total available memory bandwidth for the MSI WE65 9TJ-015CA workstation.
- The 64 GB maximum threshold necessitates the use of high density 32 GB modules in each of the 2 available slots.
- Installing modules with frequencies exceeding 2666 MHz results in automatic downclocking to the system bus limit designated by the chipset.
- The SO-DIMM form factor restricts hardware selection to 260 pin laptop memory modules and excludes desktop 288 pin DIMM hardware.
- Latency performance depends on the CAS timing compatibility between both slots to prevent system instability or boot failures.
- Accessing the physical memory sockets requires the removal of the bottom chassis panel which may involve piercing factory seal stickers on certain regional variants.
- The use of non ECC unbuffered memory is standard as professional grade error correction features generally require specific motherboard and processor parity support.