MSI Workstation WS75 10TM-493CA RAM upgrade specifications

The MSI WS75 10TM-493CA workstation features DDR4-SDRAM memory upgrade capabilities with two SO-DIMM slots supporting a maximum RAM capacity of 64 GB. Compatible memory modules operate at 2666 MHz frequency. The workstation series accommodates SO-DIMM form factor specifications for memory expansion, allowing users to upgrade from factory configurations up to the maximum supported capacity of 64 GB total memory.

Additional Notes

• The dual channel architecture requires symmetrical module pairs to maintain peak memory bandwidth for professional rendering tasks.
• Upgrading the MSI WS75 10TM-493CA necessitates a complete replacement of existing modules rather than adding new ones if both physical slots are occupied by factory hardware.
• Installing modules with frequencies exceeding 2666 MHz results in automatic downclocking to match the hardcoded motherboard bus speeds.
• The SO-DIMM form factor limits heat dissipation compared to desktop memory, requiring modules with low voltage ratings to prevent thermal throttling under heavy computational loads.
• Exceeding the 64 GB threshold prevents the system from completing the power on self test due to firmware addressing limitations.
• Accessing the internal memory slots typically involves removing the bottom chassis panel, which may encounter tamper-evident seals depending on regional warranty policies.
• Mixing memory densities between the 2 slots can cause system instability or force the hardware into asymmetrical single channel operation.