ACER TravelMate TMP259-M-366T RAM upgrade specifications

ACER TMP259-M-366T ACER TMP259-M-366T ACER TMP259-M-366T ACER TMP259-M-366T ACER TMP259-M-366T

The ACER TravelMate P2 Series TMP259-M-366T laptop features 2x SO-DIMM memory slots supporting DDR4-SDRAM upgrade specifications. Maximum RAM capacity reaches 32 GB total, with compatible memory operating at 2133 MHz frequency. Upgrade specifications indicate SO-DIMM form factor modules required for this particular model configuration and memory slot architecture.

Memory Upgrade Specifications

SpecificationValue
Memory slots2x SO-DIMM
Form factorSO-DIMM
Memory typeDDR4-SDRAM
Frequency2133 MHz
Maximum RAM32 GB
Voltage1.2V
Number of pins260-pin
InterfacePC4
PC Speed RatingPC4-2133 (PC4-17064)
Bandwidth17.1 GB/s
Laptop Release date25 October 2019

Additional Notes

  • The ACER TravelMate TMP259-M-366T accepts dual-channel DDR4 configurations, allowing simultaneous data transfer across both slots for doubled theoretical memory bandwidth compared to single-module installations.
  • DDR4-2133 operates at PC4-17000 specification with 17 GB/s peak theoretical bandwidth per module, though real-world memory throughput depends on processor memory controller capabilities and workload patterns.
  • Installing modules with different capacities between slots maintains functionality but may force single-channel operation for the asymmetric portion, reducing effective bandwidth for that capacity segment.
  • Higher-frequency modules rated at 2400 MHz or 2666 MHz will downclock to 2133 MHz when installed, as the system memory controller enforces the maximum supported frequency regardless of module capabilities.
  • The 32 GB maximum capacity requires 2 modules of 16 GB each, as SO-DIMM slots physically accommodate only 2 modules without stacking or external expansion options.
  • CAS latency variations between modules from different manufacturers remain compatible but may result in all installed memory defaulting to the slowest common timing specification to maintain stability.
  • Non-ECC unbuffered modules represent the required specification for consumer SO-DIMM slots, as ECC or registered memory types introduce incompatibility with standard laptop memory controllers.
  • Operating voltage for DDR4-2133 standardizes at 1.2V, consuming approximately 30% less power per module compared to DDR3 equivalents while generating reduced thermal output during sustained memory operations.
  • Dual-rank modules may function within the 32 GB capacity limit but introduce additional electrical load on the memory controller compared to single-rank alternatives of equivalent capacity.
  • Physical SO-DIMM dimensions of 67.6 mm length require corresponding spatial clearance within the memory bay, though standard laptop chassis designs typically accommodate this form factor without interference issues.