ASUS ProArt StudioBook W700G2T-AV069R RAM upgrade specifications

ASUS W700G2T-AV069R ASUS W700G2T-AV069R ASUS W700G2T-AV069R ASUS W700G2T-AV069R ASUS W700G2T-AV069R

ASUS ProArt StudioBook Pro 17 W700G2T-AV069R laptop RAM upgrade specifications include DDR4-SDRAM memory compatible with 2x SO-DIMM slots. Maximum memory capacity reaches 64 GB total, with compatible modules operating at 2666 MHz frequency. Upgrade options accommodate SO-DIMM form factor specifications for enhanced performance and multitasking capabilities in professional workstation applications.

Memory Upgrade Specifications

SpecificationValue
Memory slots2x SO-DIMM
Form factorSO-DIMM
Memory typeDDR4-SDRAM
Frequency2666 MHz
Maximum RAM64 GB
Voltage1.2V
Number of pins260-pin
InterfacePC4
PC Speed RatingPC4-2666 (PC4-21328)
Bandwidth21.3 GB/s
Laptop Release date17 December 2019

Additional Notes

  • The ASUS ProArt StudioBook W700G2T-AV069R relies on SO-DIMM modules rather than standard desktop DIMMs, requiring physically smaller memory sticks with 260 pins instead of 288.
  • The 2666 MHz frequency ceiling indicates Intel 8th or 9th generation mobile processor compatibility, as these chipsets natively support DDR4-2666 without overclocking.
  • Dual-channel configuration becomes possible when installing matched capacity modules across both slots, doubling memory bandwidth from 21.3 GB/s to 42.6 GB/s for graphics-intensive workflows.
  • The 64 GB maximum capacity requires 2x32 GB modules, which typically operate at higher voltages (1.35V) than standard 16 GB sticks, potentially increasing thermal load within the chassis.
  • Installing only 1 module leaves the system in single-channel mode, halving memory bandwidth and creating performance bottlenecks in rendering applications that rely on rapid data throughput.
  • DDR4-2666 modules rated at higher speeds (such as 3200 MHz) will downclock to 2666 MHz automatically, as the memory controller enforces this frequency limit regardless of module specifications.
  • Non-ECC unbuffered RAM remains the only compatible type, since mobile workstation platforms of this generation lack Error-Correcting Code memory controller support.
  • Both SO-DIMM slots must remain accessible through bottom panel removal, as soldered memory configurations do not appear in systems with 2-slot upgrade capability.
  • Warranty preservation requires avoiding modules exceeding 1.35V specification, as higher-voltage RAM can trigger thermal protection mechanisms or void coverage under manufacturer policies.
  • Mixed capacity configurations (such as 16 GB plus 32 GB) maintain dual-channel operation only for the matched portion, with the excess capacity reverting to slower single-channel mode.