ASUS ProArt StudioBook W700G3T-AV030T RAM upgrade specifications
ASUS ProArt StudioBook Pro 17 W700G3T-AV030T features DDR4-SDRAM memory upgrade specifications. The laptop contains 2x SO-DIMM slots supporting maximum RAM capacity of 64 GB. Compatible memory operates at 2666 MHz frequency using SO-DIMM form factor. Upgrade specifications enable expansion of existing memory configuration on this professional workstation model.
Memory Upgrade Specifications
| Specification | Value |
|---|---|
| Memory slots | 2x SO-DIMM |
| Form factor | SO-DIMM |
| Memory type | DDR4-SDRAM |
| Frequency | 2666 MHz |
| Maximum RAM | 64 GB |
| Voltage | 1.2V |
| Number of pins | 260-pin |
| Interface | PC4 |
| PC Speed Rating | PC4-2666 (PC4-21328) |
| Bandwidth | 21.3 GB/s |
| Laptop Release date | 30 October 2019 |
Additional Notes
- The dual channel architecture requires identical module pairs to achieve maximum theoretical memory bandwidth for rendering tasks.
- Installing a single module creates a single channel bottleneck that halves the data transfer rate between the CPU and system memory.
- High density modules exceeding 32 GB per slot will result in a failure to boot due to hardware addressing limitations of the motherboard.
- Upgrading the ASUS ProArt StudioBook W700G3T-AV030T requires modules with an internal clock speed that matches or exceeds the 2666 MHz bus frequency to avoid system downclocking.
- Low voltage 1.2V SO-DIMM components are necessary to maintain thermal efficiency within the compact chassis during sustained workloads.
- Physical access to the dual SO-DIMM slots typically involves removing the base panel, which may require specific tools to avoid damaging the internal ribbon cables or cooling assembly.
- Mixing modules with different CAS latencies forces the system to default to the slowest timing of the installed hardware.
- System stability during professional creative applications depends on utilizing non-ECC unbuffered memory to ensure compatibility with the standard ship-set firmware.