ASUS ROG G513IE-HN002T RAM upgrade specifications

ASUS G513IE-HN002T ASUS G513IE-HN002T ASUS G513IE-HN002T ASUS G513IE-HN002T ASUS G513IE-HN002T

The ASUS ROG Strix G15 G513IE-HN002T gaming laptop features DDR4-SDRAM memory upgradeable through two SO-DIMM slots. Maximum RAM capacity reaches 32 GB total, operating at 3200 MHz frequency. Compatible memory modules utilize the SO-DIMM form factor standard for laptop upgrades. Specifications support DDR4 memory technology for enhanced multitasking and gaming performance on the Strix G15 series platform.

Memory Upgrade Specifications

SpecificationValue
Memory slots2x SO-DIMM
Form factorSO-DIMM
Memory typeDDR4-SDRAM
Frequency3200 MHz
Maximum RAM32 GB
Voltage1.2V
Number of pins260-pin
InterfacePC4
PC Speed RatingPC4-3200 (PC4-25600)
Bandwidth25.6 GB/s
Laptop Release date28 July 2021

Additional Notes

  • Dual channel mode functionality requires installing identical modules in both slots to maximize memory bandwidth for the Ryzen processor in this ASUS ROG G513IE-HN002T.
  • The absence of soldered memory on the motherboard allows for the total replacement of factory modules if higher capacity or lower latency timing is required.
  • Upgrading to the maximum 32 GB capacity necessitates 2 matching 16 GB modules because the system architecture does not support 32 GB single stick configurations.
  • Latencies higher than CL22 at 3200 MHz will result in a performance bottleneck for CPU bound gaming tasks due to increased communication cycles between the processor and DRAM.
  • Physical access to the SO-DIMM slots requires the removal of the bottom chassis panel which involves a pop open screw to prevent plastic clip damage during maintenance.
  • Mixing modules with different rated speeds will force the memory controller to downclock all RAM to the lowest common frequency detected.
  • The use of 1.2V DDR4 modules is mandatory as the motherboard lacks the voltage regulation hardware for high voltage overclocking kits.
  • Standard height SO-DIMM modules must be utilized to ensure the internal copper heat shields and chassis clearance remain within factory tolerances.