ASUS ROG G814JIR-XS96 RAM upgrade specifications

ASUS G814JIR-XS96 ASUS G814JIR-XS96 ASUS G814JIR-XS96 ASUS G814JIR-XS96 ASUS G814JIR-XS96

ASUS ROG Strix G18 G814JIR-XS96 laptop features DDR5-SDRAM memory upgrade specifications. Equipped with 2x SO-DIMM slots supporting maximum RAM capacity of 32 GB. Memory operates at 5600 MHz frequency. Compatible DDR5 SO-DIMM modules enable RAM upgrades for enhanced system performance. Specifications indicate dual-slot configuration allowing memory expansion up to 32 GB total capacity through standard SO-DIMM form factor upgrades.

Memory Upgrade Specifications

SpecificationValue
Memory slots2x SO-DIMM
Form factorSO-DIMM
Memory typeDDR5-SDRAM
Frequency5600 MHz
Maximum RAM32 GB
Voltage1.1V
Number of pins262-pin
InterfacePC5
PC Speed RatingPC5-5600 (PC5-44800)
Bandwidth44.8 GB/s

Additional Notes

  • The dual-channel configuration requirement necessitates installing modules in matched pairs to maintain peak memory bandwidth and prevent latency spikes during high-load gaming scenarios.
  • System stability is contingent on using non-ECC unbuffered modules because the architecture lacks the error correction circuitry found in workstation-class hardware.
  • The 32 GB ceiling for the ASUS ROG G814JIR-XS96 indicates that any attempt to install 32 GB or 48 GB individual modules will result in a failure to post or a forced downclocking of the memory controller.
  • Replacement of existing memory involves a total swap rather than an addition since both physical SO-DIMM slots are pre-filled to reach the maximum supported capacity.
  • Heat spreader height on aftermarket memory modules must remain within standard SO-DIMM tolerances to avoid physical interference with the internal heat pipe assembly or the bottom chassis panel.
  • The 5600 MHz frequency rating depends on synchronous clock speeds across both channels and will automatically default to the lowest common speed if mismatched modules are installed.
  • Internal access for memory replacement requires the removal of the bottom casing which may involve navigating delicate ribbon cables for integrated lighting zones.