ASUS ROG GL704GW-EV045 RAM upgrade specifications

ASUS GL704GW-EV045 ASUS GL704GW-EV045 ASUS GL704GW-EV045 ASUS GL704GW-EV045 ASUS GL704GW-EV045

The ASUS ROG Strix GL704GW-EV045 gaming laptop features DDR4-SDRAM memory upgrade capabilities with 2x SO-DIMM slots. Maximum memory capacity reaches 32 GB total, supporting DDR4 modules operating at 2666 MHz. Compatible RAM upgrades utilize SO-DIMM form factor specifications, allowing users to expand memory configurations beyond factory-installed capacity for enhanced multitasking performance in gaming and content creation workflows.

Memory Upgrade Specifications

SpecificationValue
Memory slots2x SO-DIMM
Form factorSO-DIMM
Memory typeDDR4-SDRAM
Frequency2666 MHz
Maximum RAM32 GB
Voltage1.2V
Number of pins260-pin
InterfacePC4
PC Speed RatingPC4-2666 (PC4-21328)
Bandwidth21.3 GB/s
Laptop Release date01 February 2019

Additional Notes

  • The ASUS ROG GL704GW-EV045 contains 2 SO-DIMM slots, which permits only matched-pair configurations; single-module upgrades will leave one slot vacant and eliminate dual-channel bandwidth benefits.
  • DDR4-2666 MHz represents standard mobile JEDEC timing; third-party modules rated for faster speeds (DDR4-3000 or higher) will automatically downclock to 2666 MHz, wasting the premium cost of higher-frequency modules.
  • SO-DIMM form factor requires low-profile memory modules under 30 mm in height; standard desktop DDR4 DIMMs will not physically fit, and installation attempts risk socket damage.
  • The 32 GB maximum capacity ceiling means the upper bound per slot is 16 GB; any module larger than 16 GB will not register or function, regardless of BIOS updates.
  • Upgrading from the factory configuration to 32 GB (2x16 GB) doubles the memory footprint and increases sustained power draw during memory-intensive workloads, which may elevate thermals in the memory region near the SO-DIMM bank.
  • Warranty retention depends on ASUS service policies; RAM upgrades typically fall outside covered maintenance, but performing the upgrade without factory disassembly tools carries low risk of accidental component damage if standard SO-DIMM extraction procedures are followed.