ASUS TUF Gaming FX506HC-HN057W RAM upgrade specifications

ASUS FX506HC-HN057W ASUS FX506HC-HN057W ASUS FX506HC-HN057W ASUS FX506HC-HN057W ASUS FX506HC-HN057W

The ASUS TUF Gaming F15 FX506HC-HN057W laptop features DDR4-SDRAM memory with two SO-DIMM upgrade slots. The system supports a maximum RAM capacity of 32 GB total, utilizing SO-DIMM form factor modules operating at 3200 MHz frequency. Compatible memory upgrades allow users to expand from the factory configuration to the maximum specifications supported by the hardware.

Memory Upgrade Specifications

SpecificationValue
Memory slots2x SO-DIMM
Form factorSO-DIMM
Memory typeDDR4-SDRAM
Frequency3200 MHz
Maximum RAM32 GB
Voltage1.2V
Number of pins260-pin
InterfacePC4
PC Speed RatingPC4-3200 (PC4-25600)
Bandwidth25.6 GB/s

Additional Notes

  • The ASUS TUF Gaming FX506HC-HN057W contains 2 SO-DIMM slots, requiring matched pairs for optimal dual-channel performance; single-module upgrades will operate in single-channel mode, reducing memory bandwidth by approximately 50 percent and creating a performance bottleneck during intensive gaming or multitasking scenarios.
  • DDR4-3200 MHz compatibility restricts upgrade options to DDR4 modules rated at 3200 MHz or lower; faster DDR5 or non-standard frequency variants are incompatible with this generation's memory controller and will not function.
  • The 32 GB maximum capacity ceiling (16 GB per slot) means storage of large datasets, virtual machine environments, or 4K video editing workflows may encounter memory constraints that cannot be resolved through hardware upgrades on this chassis.
  • SO-DIMM form factor requires low-profile memory modules; standard UDIMM desktop RAM cannot be physically inserted into these slots, eliminating accidental installation and reducing warranty claim friction.
  • Upgrading from factory-installed capacity to the 32 GB maximum will require removal and replacement of existing modules rather than addition of new ones, necessitating a complete power-down and removal of the base panel to access the memory compartment safely.
  • Latency specifications for DDR4-3200 modules typically range from CAS 16 to CAS 22; tighter timings (CAS 16-18) provide marginal frame rate improvements in GPU-bound gaming but consume additional voltage and heat, while looser timings reduce power consumption with negligible gaming performance impact.