ASUS TUF Gaming FX506HC-HN099T-KTS RAM upgrade specifications

ASUS FX506HC-HN099T-KTS ASUS FX506HC-HN099T-KTS ASUS FX506HC-HN099T-KTS ASUS FX506HC-HN099T-KTS ASUS FX506HC-HN099T-KTS

ASUS TUF Gaming F15 FX506HC-HN099T-KTS RAM upgrade specifications include DDR4-SDRAM memory with two SO-DIMM slots. Maximum RAM capacity reaches 32 GB total, with supported frequency of 3200 MHz. Compatible memory modules utilize SO-DIMM form factor. Upgrade configurations allow installation of additional memory modules in available slots to enhance system performance and multitasking capabilities.

Memory Upgrade Specifications

SpecificationValue
Memory slots2x SO-DIMM
Form factorSO-DIMM
Memory typeDDR4-SDRAM
Frequency3200 MHz
Maximum RAM32 GB
Voltage1.2V
Number of pins260-pin
InterfacePC4
PC Speed RatingPC4-3200 (PC4-25600)
Bandwidth25.6 GB/s
Laptop Release date19 August 2021

Additional Notes

  • The dual channel configuration requires matching modules to prevent significant drops in memory bandwidth and integrated graphics performance.
  • The ASUS ASUS TUF Gaming FX506HC-HN099T-KTS architecture relies on 260 pin SO DIMM modules which occupy the entire physical space reserved for memory expansion.
  • Installing modules with higher clock speeds than 3200 will result in hardware downclocking to the processor bus limit regardless of the module rating.
  • Upgrading to the 32 maximum capacity requires removing any existing factory modules because the motherboard lacks additional unpopulated slots.
  • The use of DDR4 SDRAM indicates a fixed electricity requirement of 1.2V meaning 1.35V high performance modules will likely fail to boot or run unstable without XMP support.
  • Accessing the memory slots necessitates the removal of the entire bottom chassis plate which exposes sensitive internal components to potential electrostatic discharge.
  • System latency is determined by the highest common CAS timing between the 2 slots if mismatched brands are installed together.