DELL Latitude 5430 Rugged RAM upgrade specifications
Dell Latitude 5000 Series 5430 Rugged laptop memory upgrade specifications include two SO-DIMM slots supporting DDR4-SDRAM memory modules. Maximum RAM capacity reaches 64 GB with compatible memory operating at 3200 MHz frequency. The upgrade specifications define compatible memory types and slot configurations for this rugged mobile workstation model.
Memory Upgrade Specifications
| Specification | Value |
|---|---|
| Memory slots | 2x SO-DIMM |
| Form factor | SO-DIMM |
| Memory type | DDR4-SDRAM |
| Frequency | 3200 MHz |
| Maximum RAM | 64 GB |
| Voltage | 1.2V |
| Number of pins | 260-pin |
| Interface | PC4 |
| PC Speed Rating | PC4-3200 (PC4-25600) |
| Bandwidth | 25.6 GB/s |
| Laptop Release date | 04 June 2022 |
Additional Notes
- Dual channel memory architecture is achievable only when both SO-DIMM slots are populated with identical modules to maximize memory bus bandwidth.
- The hardware architecture of the DELL Latitude 5430 Rugged restricts memory speeds to the native frequency of the controller regardless of higher rated aftermarket modules.
- Upgrading to the maximum 64 GB capacity necessitates the removal of all factory installed modules because the system lacks additional expansion headers beyond the primary 2 slots.
- Installation of memory with lower latency timings than the manufacturer defaults may result in system instability or a failure to post due to fixed BIOS voltage parameters.
- Accessing the internal memory slots requires specialized tools and careful handling of the chassis seals to maintain the environmental ingress protection ratings of the device.
- Matching module densities across both slots prevents the system from reverting to single channel mode which would otherwise reduce data throughput by 50 percent.
- Integrating high capacity 32 GB modules in each slot enables the execution of multiple virtual machines or heavy data processing tasks without relying on slower disk based swap files.