MSI Gaming GF63 10SCSR-683FR Thin RAM upgrade specifications
The MSI GF63 10SCSR-683FR Thin Gaming series laptop features DDR4-SDRAM memory upgrade capabilities. The system contains 2x SO-DIMM slots supporting maximum RAM capacity of 64 GB. Compatible memory modules operate at 2666 MHz frequency. Specifications indicate DDR4 SO-DIMM form factor for memory upgrades. The Gaming GF series model accommodates dual memory slots for expansion, allowing users to upgrade existing RAM configurations up to the maximum supported capacity specifications.
Memory Upgrade Specifications
| Specification | Value |
|---|---|
| Memory slots | 2x SO-DIMM |
| Form factor | SO-DIMM |
| Memory type | DDR4-SDRAM |
| Frequency | 2666 MHz |
| Maximum RAM | 64 GB |
| Voltage | 1.2V |
| Number of pins | 260-pin |
| Interface | PC4 |
| PC Speed Rating | PC4-2666 (PC4-21328) |
| Bandwidth | 21.3 GB/s |
| Laptop Release date | 08 October 2020 |
Additional Notes
- Dual channel memory architecture requires installing modules in pairs of identical capacity and speed to maximize memory bus bandwidth.
- The MSI GF63 10SCSR-683FR Thin utilizes a mobile chipset that limits the peak data transfer rate to the specified frequency even if higher rated modules are installed.
- Upgrading to the maximum 64 GB capacity necessitates removing all pre-installed modules because no additional unoccupied slots exist.
- Physical access to the SO-DIMM slots requires the removal of the entire lower chassis cover which may involve piercing a factory seal sticker in certain regions.
- Standard voltage 1.2V DDR4 modules are required to ensure system stability and thermal management within the compact internal housing.
- The BIOS automatically adjusts latency timings based on the integrated SPD profile of the hardware to maintain synchronization with the 10th Gen processor.
- Internal vertical clearance within the chassis restricts the use of memory modules equipped with thick aftermarket heat spreaders.