MSI Gaming GF75 8RC-207XRU Thin RAM upgrade specifications

MSI GF75 8RC-207XRU Thin MSI GF75 8RC-207XRU Thin MSI GF75 8RC-207XRU Thin MSI GF75 8RC-207XRU Thin MSI GF75 8RC-207XRU Thin

The MSI GF75 8RC-207XRU Thin Gaming series laptop features DDR4-SDRAM memory upgrade specifications. The system contains 2x SO-DIMM memory slots supporting a maximum RAM capacity of 32 GB total. Compatible memory modules operate at 2666 MHz frequency and utilize the SO-DIMM form factor. Upgrade configurations allow installation of DDR4 memory modules in available slots to expand system memory capacity up to the specified maximum specifications for enhanced performance.

Memory Upgrade Specifications

SpecificationValue
Memory slots2x SO-DIMM
Form factorSO-DIMM
Memory typeDDR4-SDRAM
Frequency2666 MHz
Maximum RAM32 GB
Voltage1.2V
Number of pins260-pin
InterfacePC4
PC Speed RatingPC4-2666 (PC4-21328)
Bandwidth21.3 GB/s
Laptop Release date10 July 2019

Additional Notes

  • Utilizing both memory slots is necessary to enable dual channel mode and prevent memory bandwidth limitations during processor intensive tasks.
  • The processor architecture in the MSI GF75 8RC-207XRU Thin restricts the memory clock speed to 2666 MHz even if modules rated for higher frequencies are installed.
  • Adding 16 GB modules to each slot reaches the hardware ceiling of 32 GB since the motherboard does not support high density 32 GB sticks.
  • Physical installation requires 260 pin SO-DIMM modules as standard desktop DIMM hardware is incompatible with this chassis.
  • Mixing modules with different latencies or timings causes the BIOS to downclock all memory to the slowest common denominator.
  • Maintenance access to the memory slots requires removal of the entire bottom panel which may affect warranty seals depending on regional service policies.
  • The system requires 1.2V DDR4 modules to maintain thermal stability within the thin profile enclosure.