MSI Gaming GF75 8RD-018CZ Thin RAM upgrade specifications
MSI GF75 8RD-018CZ Thin gaming laptop supports DDR4-SDRAM memory upgrades through 2x SO-DIMM slots. Maximum RAM capacity reaches 32 GB total. Compatible memory modules operate at 2666 MHz frequency. Upgrade specifications indicate SO-DIMM form factor memory is required. Current configuration and expansion capabilities depend on existing memory installation in the Gaming GF series model.
Memory Upgrade Specifications
| Specification | Value |
|---|---|
| Memory slots | 2x SO-DIMM |
| Form factor | SO-DIMM |
| Memory type | DDR4-SDRAM |
| Frequency | 2666 MHz |
| Maximum RAM | 32 GB |
| Voltage | 1.2V |
| Number of pins | 260-pin |
| Interface | PC4 |
| PC Speed Rating | PC4-2666 (PC4-21328) |
| Bandwidth | 21.3 GB/s |
| Laptop Release date | 25 May 2019 |
Additional Notes
- The dual-slot configuration allows for dual-channel memory architecture which significantly improves integrated graphics performance and memory bandwidth compared to single-channel setups.
- Upgrading the MSI GF75 8RD-018CZ Thin to the maximum supported capacity requires the installation of 2 matched 16 GB modules since the system firmware cannot address individual sticks larger than 16 GB.
- Installing memory modules with speeds higher than 2666 MHz will result in automatic downclocking to match the hardware limitations of the processor memory controller.
- The SODIMM form factor necessitates the use of 260-pin modules designed for narrow physical clearances common in slim-profile chassis designs.
- Populating both slots with identical latency timings is required to prevent system instability or forced fallback to the slowest common denominator SPD profile.
- Physical access to the memory slots involves removing the entire bottom panel which may involve piercing a factory seal sticker in certain regions.