MSI Gaming GL63 8SC-012AU RAM upgrade specifications
MSI GL63 8SC-012AU gaming laptop features DDR4-SDRAM memory upgrade capabilities with two SO-DIMM slots supporting maximum capacity of 32 GB RAM. The memory modules operate at 2666 MHz frequency. Compatible DDR4 SO-DIMM memory upgrades enable expansion from factory configuration to the maximum 32 GB specification. Existing memory modules can be replaced or additional capacity installed in available slots to enhance system performance. The GL series gaming laptop specifications support standard DDR4 memory form factor upgrades meeting industry specifications for compatibility.
Memory Upgrade Specifications
| Specification | Value |
|---|---|
| Memory slots | 2x SO-DIMM |
| Form factor | SO-DIMM |
| Memory type | DDR4-SDRAM |
| Frequency | 2666 MHz |
| Maximum RAM | 32 GB |
| Voltage | 1.2V |
| Number of pins | 260-pin |
| Interface | PC4 |
| PC Speed Rating | PC4-2666 (PC4-21328) |
| Bandwidth | 21.3 GB/s |
| Laptop Release date | 17 September 2019 |
Additional Notes
- The dual slot configuration supports dual channel architecture when identical modules are installed which provides a significant increase in memory bandwidth for frame rate stability.
- Upgrading the MSI GL63 8SC-012AU beyond the 32 GB threshold will result in a failure to boot due to firmware addressing limitations.
- The use of SO-DIMM modules necessitates a vertical stack arrangement that requires careful cable management of the internal Wi-Fi antennas during the installation process.
- Installing memory with a frequency higher than 2666 MHz will cause the system to automatically down-clock the modules to match the maximum bus speed supported by the chipset.
- Accessing the memory banks requires the removal of the entire base panel which involves breaking a factory seal sticker and potentially impacting local warranty terms depending on regional consumer laws.
- Mixing modules with different CAS latencies will force the system to operate at the timings of the slowest stick which increases overall memory latency.
- The 2 slot limit means that reaching maximum capacity requires the replacement of existing modules rather than simple addition because there are no vacant banks for expansion.